Autodesk Inventor® 2019
Tube & Pipe Routed Systems

Master Inventor!

Autodesk Developer Network

Leverage the Tube and Pipe module!

The Inventor 2019: Tube & Pipe Routed Systems course shows you how to work effectively in the Tube and Pipe environment. After mastering the skills taught in the course you can rest assured that your runs will update properly and automatically. Learn how to make custom Tube and Pipe Styles, publish custom iPart Families to the Content Center, create derived routes and autoroutes, populate your routes, and much more!

First you'll learn how routed systems affect BOMs and how to assure your BOMs look the way you want them to. Keep in mind that this is an advanced course that assumes you know how to customize BOM tables. If you need to learn how to do this you should watch the 2D Drafting and Customization course as well as the Assemblies and Advanced Concepts course. The Tube and Pipe Routed Systems course shows you how to setup your routes so that the outcome is a structured BOM. It gives you control over what and where components are listed in the BOM.

It's the easiest way to become productive with Tube and Pipe! The Tube and Pipe Module is one of those rare addins that require extensive training. It isn't as intuitive as other models. So you will need our help to unlock the power of Tube and Pipe's full potential.

This doesn't mean Tube and Pipe is difficult to learn or use. In fact, once you understand its secrets you'll find it's a powerful and easy to use tool.

So what will this course teach you? You'll learn how to create Tube and Pipe styles and publish custom iPart Families to the Content Center. You'll create derived routes and auto-routes and you'll learn the differences between them. Once you've mastered routes you'll learn how to automatically populate them with custom and standard parts. You'll also learn how to modify the assembly without having to start from scratch, which is what most users need to do when you don't get this training.

Need to master Tube and Pipe? This course is all you'll need to get the job done in a timely manner.

57 Lessons (Listed Below)

5.1 hours of instruction

You can also browse through the lessons from the following Inventor 2019 courses and watch sample lessons.

Inventor 2019: Solid Modeling Inventor 2019: Assemblies and Advanced Concepts Inventor 2019: 2D Drafting and Customization Inventor 2019: Sheet Metal Design Inventor 2019: Tube and Pipe Routed Systems Inventor 2019: Inventor Studio Made Simple Inventor 2019: iLogic Made Simple Inventor 2019: Fea Made Simple Inventor 2019: Dynamic Simulation Made Simple

Our Inventor courses require No Installation. You can watch them on any device connected to the internet.

You will receive an email containing your User Name and Password. Login to your account and start learning. It's that easy.

While you're logged into your account you can download files used in the courses, watch lessons, and practice the tasks taught in the lessons. Keep in mind that you will use your installation of Inventor to practice.

Get your Inventor 2019 training now. You can start learning in minutes.

Autodesk Inventor® 2019:
Tube & Pipe Routed Systems

No Installation Required

Watch from any device connected to the internet.

Inventor 2019: Tube & Pipe Routed Systems

$54.95 - $109.95

Watch Sample Lessons

Watch the first hour of the Solid Modeling course for Autodesk Inventor 2019.

Inventor 2019 Sample LessonsClick to Watch!

Tube & Pipe Routed Systems

5.1 hours of instruction


Content Center File Locations
Introduction to Routed Systems
Intro to Tube and Pipe Styles
BOMs and Routed Systems
BOM Customization
Adopting a Structured Process
Copying Tube and Pipe Styles
Custom Tube and Pipe Styles
Tube and Pipe Style Rules
Dimensioning Autoroutes
BOM Consolidation
Import Export Styles
Tube and Pipe Templates
3D Route Tool Ridged Pipe
Stock Pipe and Deleting Nodes
Tube and Pipe Authoring
Engagement Range Settings
Inline Authored Components
Replacing Fittings
Connecting Fittings
Inserting Fittings
Custom iPart Requirements
Custom Pipe iPart Styles
Custom Coupling iPart Styles
Custom Elbow iPart Styles
Custom Reducer iPart Styles
Custom Valve iPart Styles
Custom Tube and Pipe Library
Batch Publishing iParts
Testing Published iParts
Setting Up Custom iPart Styles
Preparing Assemblies
Strategy for Editable Routes I
Strategy for Editable Routes II
Updating Styles
Constraining Autoroutes
Modifiable Assemblies
Derived Routes
Autoroutes vs Derived Routes
Phantom Route Guide
Updating BOMs
System Defined Levels of Detail
Flexible Hose Styles
Flexible Hose Routes
Editing Hose Routes
Mastering Tubing Routes I
Mastering Tubing Routes II
Publishing Self Draining iParts
Custom Self Draining Styles
Self Draining Routes
Derived Assemblies
Reducers and Runs
Trick for Placing Fittings
Tricks for Constraining Routes
Connecting Runs

Cookie Consent

Our website uses cookies to provide quality browsing experience and relavent information. Before continuing to use our website, please agree & accept our Cookie & Privacy Policies.