SOLIDWORKS® 2013
Sheet Metal Design

Master SOLIDWORKS!

Advance Your Sheet Metal Skills!

The Sheet Metal Design course is the last course in the SolidWorks 2013 series of courses. That is, last but not least. This course amplifies your ability to create professional sheet metal models that match prototype and production samples.

You will learn about Bend Allowances, K-Factors, and Bend Tables. The course explains all the components of sheet metal design in simple to understand steps. So you can rest assured you will know how to apply them to your sheet metal models.

While your instructor explains how all the sheet metal commands work he’ll also show you best practices and sound procedures. So he’ll explain what to do and what not to do. He’ll also explain why. People tend to remember better when they know why something is done in a specific way. So you might see an example of how things can go wrong, and then you’ll learn how to fix the problem.

You’ll also learn structured methods of creating sheet metal assemblies. For example you’ll learn how to build assemblies from the ground up using Bottom Up Design. You’ll practice Top Down Design and explore the power of using this technique. Each step of the way you’ll learn sound practices and procedures.

This course is packed with tips and tricks that will help speed your work, increase the accuracy of your work, and assure you are producing professionally sound models.

33 Lessons (Listed Below)
3.6 Hours

Our SOLIDWORKS 2013 courses require No Installation. Watch on any device connected to the internet.

You will receive an email containing your User Name and Password. Login to your account and start learning. It’s that easy.

While you’re logged into your account you can download files used in the courses, watch lessons, and practice the tasks taught in the lessons. Keep in mind that you will use your installation of SolidWorks to practice.

Get your  SolidWorks 2013 training now. You can start learning in minutes.

SOLIDWORKS® 2013:
Sheet Metal Design

No Installation Required

Watch from any device connected to the internet.

$54.95$109.95Select options

What do I get?

User Account Email containing

When you login you get

SOLIDWORKS 2013: Sheet Metal Design

Introduction
Base Flange Command
Edge Flange Command
Flange Profiles
Bend Relief Settings
Miter Flange Command
Corner Trim Command
Trick for Corner Relief
Linking Variables
K-Factors and BA
Bend Deduction
Bend Tables
Gauge Tables
Sheet Metal Templates
Basic Construction Strategy
Closing Corners
Hems in Detail
Bottom Up Sheet Metal Part I
Bottom Up Sheet Metal Part II
Bottom Up Sheet Metal Part III
Custom Drawing Bend Lines
Sheet Metal Drawing Colors
Sheet Metal Drawing Templates
Model to DXF
Drawing to DXF
Multi-Body Sheet Metal Intro
Holes on Multi-Bodies
Adding Bodies to Hole List
Simple Hole vs Hole Wizard
Multi-Body Practice and Tips
Multi-Body to Assembly
Multi-Body to Drawing and DXF
Conclusion