SolidWorks® 2019
Professional Modeling

Master SolidWorks!

SolidWorks Solution Partner

Gain a Professional Edge!

The first SolidWorks training course in the series is SolidWorks 2019: Professional Modeling. It teaches just what the name implies. You'll learn practical ways of working with SolidWorks in a professional and structured manner. Specifically, you'll learn best practice methods of creating bulletproof models.

You'll learn the basics through an extremely advanced level of skills. So beginner and advanced users should start with this course. It provides founding skills of best practice that are used in subsequent courses.

The Professional Modeling course starts by showing the basics. You'll learn how to work with sketches, and then you'll begin working with feature tools like Extrude, Revolve, and Cuts. Once you have these concepts under your belt you begin working with advanced feature tools like linear and circular patterns, sweeps, and lofts. All the while you will compare these commands to similar commands in the 2D sketch environment. The goal at this point is to show you that you can use different commands to create the same features. It also demonstrates that which commands you choose will determine the ease or difficulty of editing the model later.

As you proceed further into the course you'll learn how to use more advanced commands like the Hole Wizard, Mirroring Features, Mounting Bosses and Ribs. You'll practice adding draft, using the Boundary command, and many more advanced concepts and commands.

By the time you finish this course you will have a strong understanding of best practices and sound procedures for using SOLIDOWORKS to create professional models.

With over 7.0 hours of video instruction, the Professional Modeling course is all you need to build a strong platform of skills. You'll also use these SolidWorks skills in subsequent courses.

69 Lessons (Listed Below)

7 hours of instruction

Browse through the lessons from the following SolidWorks 2019 courses and watch sample lessons.

SolidWorks 2019: Professional Modeling SolidWorks 2019: Advanced Parts & Assemblies SolidWorks 2019: Mechanical Drawings SolidWorks 2019: Sheet Metal Design SolidWorks 2019: FEA Made Simple

Our SolidWorks courses require No Installation. You can watch them on any device connected to the internet.

You will receive an email containing your User Name and Password. Login to your account and start learning. It's that easy.

While you're logged into your account you can download files used in the courses, watch lessons, and practice the tasks taught in the lessons. Keep in mind that you will use your installation of SolidWorks® to practice.

Get your SolidWorks® 2019 training now. You can start learning in minutes.

SolidWorks® 2019:
Professional Modeling

No Installation Required

Watch from any device connected to the internet.

SolidWorks 2019: Professional Modeling

$54.95 - $109.95

Watch Sample Lessons

Watch the first hour of the Professional Modeling course for SolidWorks 2019.

SolidWorks 2019 Sample LessonsClick to Watch!

Professional Modeling

7 hours of instruction

Lessons

Introduction
Custom Templates
Organizing File Storage Locations
Creating Sketches
Shaded Sketch Contours
Extruding a Profile
Mastering View Commands
UI Settings
Updating Templates
Inferred and Automatic Relations
Fully Defining Sketches
Mirroring Sketch Geometry
Revolving a Profile
Extruded Cuts
Linear Patterns
Circular Patterns
Sketch Patterns vs 3D Patterns
Missing Pattern Geometry
Sweep
Guide Curve Sweep
Multiple Guide Curve Sweep
Wrap Path and Guide Curve

Advanced Sweep Profile Concepts
Practical Sweep Application
Introduction to the Shell command
Shell Command Strategy
Application of the Shell Command
Reusing Sketches
Introduction to the Hole Wizard
Oblique Surface Construction
Advanced Hole Placement
Finishing Features
Introduction to the Loft Command
Loft Twist and Connection Points
Loft Guide Curves
Loft Guide Curve Influence
Start and End Loft Constraints
Centerline Lofts
Closed Loop Lofts
Tangent Faces and Guide Curves
Sweep vs Loft
Using 3D Sketches
3D Sketch Planes
Advanced 3D Sketch Techniques
Mirroring Features
Introduction to Splines
Advanced Spline Constraints
Using 3D Splines
Mounting Bosses
Boss Fins
Trick for Adding Boss Ribs
Contour Ribs
Rib Matrix
Draft
Repairing Ribs
Strategy for Applying Fillets
Forcing Fillet Construction
Mouse Gestures
Shortcut Keys
Shortcut Bars
Multiple Sketch Relations
Copying Sketch Geometry
Boundary Command Details
Complex Boundaries
The Dome Command
Text on Sketches
More Text Strategies
Embossing and Engraving
Conclusion

Cookie Consent

Our website uses cookies to provide quality browsing experience and relavent information. Before continuing to use our website, please agree & accept our Cookie & Privacy Policies.