Autodesk Inventor® 2016
iLogic Made Simple

Master Inventor!

Autodesk Developer Network

iLogic creates parts, assemblies, and drawings with a click of a button. This course shows you how!

Even if you're not a programmer, you can learn iLogic. The Inventor 2016: iLogic Made Simple course shows you how to extract programming language from the software to write new programs. You just need to know a few basics and you're on your way.

iLogic can be used to automate any task you typically perform with Autodesk Inventor. For example, you can draw an irregular shaped profile with a single click of a button. If you find yourself repeating tasks like this over and over you might try using iLogic.

This course starts with the basics and progressively builds the skills you need to automatically change features on parts, change parts on assemblies and generate drawings for all the new parts. It goes far beyond any training on the market today, but simplifies the process so that anyone can do it.

68 Lessons & 67 Tips (Listed Below)

6.5 hours of instruction

You can also browse through the lessons from the following Inventor 2016 courses and watch sample lessons.

Inventor 2016: Solid Modeling Inventor 2016: Assemblies and Advanced Concepts Inventor 2016: 2D Drafting and Customization Inventor 2016: Sheet Metal Design Inventor 2016: Tube and Pipe Routed Systems Inventor 2016: Inventor Studio Made Simple Inventor 2016: iLogic Made Simple Inventor 2016: Fea Made Simple Inventor 2016: Dynamic Simulation Made Simple

Our Inventor courses require No Installation. You can watch them on any device connected to the internet.

You will receive an email containing your User Name and Password. Login to your account and start learning. It's that easy.

While you're logged into your account you can download files used in the courses, watch lessons, and practice the tasks taught in the lessons. Keep in mind that you will use your installation of Inventor to practice.

Get your Inventor 2016 training now. You can start learning in minutes.

Autodesk Inventor® 2016:
iLogic Made Simple

No Installation Required

Watch from any device connected to the internet.

Inventor 2016: iLogic Made Simple

$54.95 - $109.95

Watch Sample Lessons

Watch the first hour of the Solid Modeling course for Autodesk Inventor 2016.

Inventor 2016 Sample LessonsClick to Watch!

iLogic Made Simple

6.5 hours of instruction

Lessons

Introduction
ILMS-Tip-1
iLogic Parameters
ILMS-Tip-2
Preparing Parts for iLogic
ILMS-Tip-3
iLogic Rule Basics
ILMS-Tip-4
iLogic Suppression
ILMS-Tip-5
Reusing Code
ILMS-Tip-6
Strategy for Using iLogic
ILMS-Tip-7
Mastering Snippets
ILMS-Tip-8
iLogic Assemblies
ILMS-Tip-9
Linking Imported Parameters
ILMS-Tip-10
Troubleshooting Rules
ILMS-Tip-11
Working with String Parameters
ILMS-Tip-12
Mastering Case Statements
ILMS-Tip-13
Expanding Rule Functionality
ILMS-Tip-14
Nested Case Statements
ILMS-Tip-15
iLogic Forms
ILMS-Tip-16
Creating iLogic Forms
ILMS-Tip-17
Configuring Controls
ILMS-Tip-18
Filename Parameters
ILMS-Tip-19
Linking Filename Parameters
ILMS-Tip-20
Control Testing Strategies
ILMS-Tip-21
Automatically Save Files
ILMS-Tip-22
Point Assembly to Component Files
ILMS-Tip-23
Replacing Parts with iLogic
ILMS-Tip-24
Master Rules
ILMS-Tip-25
Algorithms
ILMS-Tip-26
Triggers
ILMS-Tip-27
Redundant Files
ILMS-Tip-28
Pre-Existing Files
ILMS-Tip-29
Building Descriptions and Titles
ILMS-Tip-30
Snippet Workflow
ILMS-Tip-31
Opening Excel Files
ILMS-Tip-32
While Loops
ILMS-Tip-33
Populating Excel Worksheets
ILMS-Tip-34
Updating Master Rules
ILMS-Tip-35
Multi-Line Messages
ILMS-Tip-36
Searching Tables
ILMS-Tip-37
Trick for Stopping Rules
ILMS-Tip-38
Preventing Duplicate Records
ILMS-Tip-39
Stopping Error Messages
ILMS-Tip-40
Updating Assembly Components
ILMS-Tip-41
Cleaning Up Your Code
ILMS-Tip-42
Building Assemblies and Testing
ILMS-Tip-43
Automating Mechanical Drawings
ILMS-Tip-44
Testing Rules on Drawings
ILMS-Tip-45
Control Section Cutting Lines
ILMS-Tip-46
Break Views and Detail Circles
ILMS-Tip-47
Automating Broken Views
ILMS-Tip-48
Broken View Rule Details
ILMS-Tip-49
Break Multiple Views
ILMS-Tip-50
Dimensions on Suppressed Features
ILMS-Tip-51
Determining Rule Placement
ILMS-Tip-52
Using Shared Variables
ILMS-Tip-53
Robust Shared Variables
ILMS-Tip-54
Testing Shared Variable Rules
ILMS-Tip-55
Running idw Rules from Assemblies
ILMS-Tip-56
Saving Drawing Files
ILMS-Tip-57
Change View File Reference
ILMS-Tip-58
Update Reference File
ILMS-Tip-59
Passing iProperties and Parameters
ILMS-Tip-60
Replacing Drawing References
ILMS-Tip-61
Assembly Drawing Rules
ILMS-Tip-62
Passing Assy to Drawings
ILMS-Tip-63
One Click Assy Parts & Drawings
ILMS-Tip-64
Creating Input List Radio Boxes
ILMS-Tip-65
External Rules
ILMS-Tip-66
Global Forms
ILMS-Tip-67
Conclusion

Cookie Consent

Our website uses cookies to provide quality browsing experience and relavent information. Before continuing to use our website, please agree & accept our Cookie & Privacy Policies.